This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

AI & Automation

Instrumenting LoRa networks so an AI agent or any script can monitor, test and diagnose them in a closed loop.

Let an AI agent watch and drive the LoRa band

LoRaScope exposes its feed and controls over telnet and REST, so an agent or any script can watch the band, act on it and observe the result without a person in the loop.

Visit the AI & Automation Page

Overview

LoRaScope exposes its live feed and its controls over telnet and REST. An agent can watch the band, read decoded packets, run custom decoders, then inject and emulate traffic to test a hypothesis and watch the result, and repeat. Because it works at the radio layer, an agent can instrument a site even where there is no LoRaWAN network server and no gateway to log into.

What it enables

See: agent-readable

Stream the live decoded-packet feed (RSSI, SNR, source, payload, timestamps) over telnet or REST, and query the capture store, link health and historical logs. Every packet is also logged to SD as CSV.

Act: agent-controllable

Switch channel and protocol, inject packets, and emulate a hub or node through the same API for every stack (LoRaWAN, LoRaBASIC and MeshCore).

Loop: closed-loop diagnosis

With both, an agent can run fault diagnosis on its own: form a hypothesis, inject a test, read the result, and narrow down a problem without a person on site.